ngHobbies
GOPRO HERO 3 RIGHT ANGLE FPV VIDEO CABLE
feed from a GoPro 3 HD camera to an FPV video transmitter. The right angle cable and USB connector fits the GoPro Hero 3 cameras AV plug and the servo type connector has the following connections:, Yellow (Orange) - Video out,
This cable offers FPV audio and video Red - Audio ...ngHobbies
FATSHARK EXTENDED BATTERY XT-60
,
This is the new 1000mAh extended LiPo battery from Fatshark. ...ngHobbies
TELEMETRY ADAPTER CABLE FOR APM 2.5
| Datasheet | N/A |
ngHobbies
FATSHARK TRINITY HEADTRACKER MODULE
| http | //www.youtube.com/watch?feature=player_embedded&v=XYhd_I5AB5E |
from Fatshark. This module can be purchased to replace the head-tracking module in your existing goggles. It is compatible with:, - MIG head-tracker (Replacement is easy but requires carefully opening the MIG casing), Watch the video below for performance:,
This is the new final production version of the new ...ngHobbies
EZUHF 4CH RECEIVER LITE
| Width | 24mm |
| Height | 7.5mm |
| Length | 65mm |
| Weight | 8 grams (without antenna) |
Notice:, , Dimensions:, , Content of the pacakge:, 1 x EzUHF Lite 4 channel Receiver, Note:, , Documentation:, , Support thread on RcGroups:,
EzUHF Long-Range R/C Lite Receiver, 4 channel compact, sensitive, same ...ngHobbies
SPIRONET 5.8GHZ PATCH ANTENNA
| VSWR < 1.5 | 1 (5740 - 5860MHz) |
Features:, Right-hand circular polarization,
This is a brand new13dBi Circularly Polarized Patch antenna from ...ngHobbies
GOPRO HERO 3 FPV IMMERSIONRC CABLE WITH POWER
. The USB connector fits the GoPro Hero 3 cameras AV plug and the 5 pin Molex type connector has been provided to be plug and play with the video 2.4GHz and 5.8GHz transmitters designed and manufactured by Immersion RC. The 5 pin Molex connector has the following connections:, Brown - Ground connection, The power requirement for the GoPro camera is minimum 1A at 5V. The provided servo cable connections are:, Red - +5V (Do not exceed 5V), Please note:, The Immersion RC or Fatshark transmitters CANNOT supply enough power on the 5V out line to power the GoPro camera in flight. DO NOT risk it, it will damage your Immersion RC transmitter - or you will loose your transmitter in the air!!!,
Beside the FPV audio and video feed from a GoPro ...ngHobbies
2 AXIS BRUSHLESS GIMBAL FOR GOPRO CAMERAS
| http | //www.basecamelectronics.com/downloads/ |
Please note:, motors and controllers are not included. Please check below in the specifications for the required motors and controllers., Specifications:, Strong anodized aluminum frame, easy to assemble, Recommended motors (only one pair is required):, 2 x, recommended controller:, 2 axis brushless controller, Content:, This package contains all the items on the main picture:, Hardware pacakge,
This package contains all the necessary hardware pieces to assemble ...ngHobbies
3 AXIS BRUSHLESS GIMBAL FOR SONY NEXUS CAMERAS
| http | //www.basecamelectronics.com/downloads/ |
Please note:, motors and controllers are not included. Please check below in the specifications for the required motors and controllers., Specifications:, Strong anodized aluminum frame, easy to assemble, Recommended motors (only one pair is required):, 3 x, recommended controller: 3, Content:, This package contains all the items on the main picture:, Hardware pacakge,
This package contains all the necessary hardware pieces to assemble ...ngHobbies
2 AXIS BRUSHLESS GIMBAL FOR SONY NEXUS CAMERAS
| http | //www.basecamelectronics.com/downloads/ |
Please note:, motors and controllers are not included. Please check below in the specifications for the required motors and controllers., Specifications:, Strong anodized aluminum frame, easy to assemble, Recommended motors (only one pair is required):, 2 x, recommended controller:, 2 axis brushless controller, Content:, This package contains all the items on the main picture:, Hardware pacakge,
This package contains all the necessary hardware pieces to assemble ...ngHobbies
GOPRO HERO 3 FPV CABLE WITH POWER
. The USB connector fits the GoPro Hero 3 cameras AV plug and the 3 pin servo type connector has been provided to be a convenient connection to other FPV transmitter solutions. The 3 pin servo connector has the following connections:, Brown - Ground connection, The power requirement for the GoPro camera is minimum 1A at 5V. The provided servo cable connections are:, Red - +5V (Do not exceed 5V), Please note:, The Immersion RC or Fatshark transmitters CANNOT supply enough power on the 5V out line to power the GoPro camera in flight. DO NOT risk it, it will damage your Immersion RC transmitter - or you will loose your transmitter in the air!!!,
Beside the FPV audio and video feed from a GoPro ...ngHobbies
SPIRONET 5.8GHZ LH V2 ANTENNA SET
,
This is the SpiroNET 5.8GHz circular polarized antenna from ImmersionRC ...ngHobbies
FRSKY USB UPGRADE CABLE
,
FEATURES This tool will allow upgrade of DFT/DJT/DHT/8ch Telemetry Receiver/Sensor ...